Use the Edgemate 100 for many applications including backsplashes, bevels, seam dressing, grinding back laminated build ups and tops with inside corners like your "L" shape and bat wing tops. Because it is portable, you carry the machine to the stone, not the other way around, saving time and labor costs.
- Set the Edgemate 100 on its own table just to do backsplashes. Just slip the backsplash underneath the track while the track and machine stays clamped to the table.
- The Edgemate 100 has a 45 degree stop to do beveled edges. It also has sliding stops to do any type of bevel including an inverted bevel.
- For small shops without a bridge saw, the quality of your saw cut becomes less important because you can remove the saw kerfs in the edge shaping procedure.
- Shops that do laminated or built up edges won't need to go back and re-saw the edge, just start with a coarse cup wheel and grind back your glued up edge.
Use the Edgemate 100 to prep your seams to create a nearly invisible seam. Use the Edgemate to grind the stone seam back using a cupwheel until all the chips are removed from the top face of the stone. Then grind a back bevel to allow space for the epoxy, all in one set up.
See Specifications and Warranty
Edgemate 100 package with one 12' track length. It includes:
- a ready to use machine
- one 12' track length or 7.3' and 4.6'
- a 12 amp Makita angle grinder
- two track bump stops
- two clamps for the track
- a 25' GFCI power cord
- a 25' water hose
List Price $6,700.00
plus shipping + tax for MN residents
plus shipping + tax for MN residents
Professional Edges Made Easy
Edgemate 100 package with three tracks. It includes:
- a ready to use machine
- 3 tracks: 12', 7.3' and 4.6'
- a 12 amp Makita angle grinder
- two track bump stops
- two clamps for the track
- a 25' GFCI power cord
- a 25' water hose
List Price $6,999.00
plus shipping + tax for MN residents
plus shipping + tax for MN residents
The Edgemate 100 is the only
- portable line polisher.
- portable machine that can create a polished profiled edge using a cup wheel and polishing pads for any radius roundover, bevel and flats.
- line polisher that can create a continuous edge on seamed tops that are milled in the shop as one piece.
- portable machine that can back grind your seams. It will make your seams so invisible you won't need to color your epoxy.
612-741-6510
We welcome your inquiry!
Home | Edgemate 100 | Edgemate Prowler | About Us | Contact Us
Copyright 2005-2010 by Edgemate Stone Tools LLC. All rights reserved. All information is correct to the
best
of our knowledge but prices and products may change without warning.